全部答案

2011-06-01 08:55:43

• 可以到河南开拓找下破碎机的资料

  全部
  

  2***

  2011-06-01 08:55:43

  45 26 评论

  分享
  提交评论
2011-05-28 16:31:43

•   本设计主要介绍了综采工作面转载锤式破碎机，以及锤式破碎机的工作原理，结构与应用：锤式破碎机用于破碎各种中硬且磨蚀性弱的物料。其物料的抗压强度不超过100MPa，含水率小于15%。被破碎物料为煤、盐、白?住⑹唷⒆┩摺⑹沂取；褂糜谄扑橄宋峁埂⒌院腿托越锨康乃槟就贰⒅秸呕蚱扑槭匏嗟姆狭弦?回收石棉纤维等等。
    
  PCM400型锤式破碎机与SZZ1350/525型转载机配套使用，并与配套的胶带式输送机及皮带机尾自移装置、工作面刮板输送机、采煤机及液压支架配套作业，实现综合机械化采煤及破碎、运输工作。PCM400型锤式破碎机可调整的煤粒度为300～150mm，将普氏硬度系数f ≤4。
    5的大块煤炭破碎到所需块度。
  关键词：锤式破碎机;    破碎装置；   减速器
  Abstract
  This design introduces a fully mechanized coal face reproduced hammer crusher and hammer crusher of principle, structure and application: hammer crusher for crushing all kinds of hardware and erosion of weak materials。
     Its material does not exceed the compressive strength of 100 MPa, moisture content of less than 15 percent。 Was broken materials for coal, salt, chalk, plaster, brick, limestone, and so on。
     Also used for broken fiber structure, flexibility and toughness stronger broken wood, paper or broken asbestos cement waste recycling to asbestos fibers, and so on。
    
        PCM400-hammer crusher and SZZ1350/525 supporting the use of machine-reproduced, and supporting the plastic belt conveyor belt and the tail from shifting devices, face scraper conveyor, hydraulic support Shearer and supporting operations and achieve Comprehensive mechanized mining and crushing, transportation work。
     PCM400-hammer crusher adjust the size of coal to 300 ~ 150 mm, will Platts hardness factor f ≤ 4。5 to the large coal broken pieces of the necessary。
    
  。

  全部
  

  若***

  2011-05-28 16:31:43

  70 20 评论

  分享
  提交评论